GRAPHIC INSTALLATION INSTRUCTIONS
for purchasing our easy to install vinyl graphics!!
Now that you have your graphics, we can show you how
to install them. Remember, decal installation is a skill
that can be learned, but may not be mastered by all
people. If you feel that you can not install the decals
after reading the instructions included with the product
and the instructions listed here, consult a local body
shop or a car detailing facility for assistance. While
we may offer you a discounted rate for a replacement
decal (at our discretion), you will need to send back
the improperly installed item first.
BEFORE YOU BEGIN:
- All products are designed for installation on the
outside of the vehicle.
- Required Items include an installation squeegee (included),
masking tape, glass cleaner, dry paper towels, measuring
tape or ruler.
- Do not apply any vinyl graphics in direct sunlight.
Make sure it is between 60 degrees and 80 degrees F
- Do not store unapplied graphics in direct sunlight
- damage may occur.
- All dirt, grease and wax must be removed from the
car surface before the decal is applied. This includes
wax from mechanical car washes, rain-x, compound, etc.
Failure to take this step may result in the decal not
sticking to the vehicle surface.
|Standard Decal Installation:
These instructions are for installing computer cut vinyl lettering and logos to glass, paint, plastic, metal or any smooth surface. CLICK
|Full Color Printed Decal Installation:
These instructions are for installing printed vinyl lettering and logos to glass, paint, plastic, metal or any smooth surface. CLICK
|Racing Stripe Kit Installation:
These instructions are for installing premium vinyl racing/rally stripes CLICK
|Blank Vinyl Strip Installation:
These instructions are for installing blank vinyl material on your car truck boat RV motorcycle
|Rear Window See Thru Mural Installation:
These instructions are for installing see thru material on glass surface of trucks cars rvs or boats CLICK
APPLICATION vs WET APPLICATION:
We suggest installing all graphics using the dry application
method shown here. . Installing it dry will insure that the
decal stays adhered to the vehicle surface, while wet application
may cause the decal to not adhere to the vehicle surface.
If installing it wet, NEVER use soapy water, only use normal
water. We only support our products when installed dry.
Once the decal is installed, to keep it looking new, simply
wash it whenever you wash the vehicle. You can apply car wax,
clearcoat, or RainEx over the decal once it is applied. your
new decal will give you years of great looks. If you are in
cold climate be careful when using an ice scraper on any surface
where decals are applied.
page is protected by U.S. and International Copyrights.
Any duplication or distribution of this information in any
form is illegal. We have successfully prosecuted content
theft in the past and aggressively pursue violators. The
information has been imbedded with searchable phrases which
can be traced to any website using them.